Details Below -- Click picture for larger view

Chain Operation Insulated Security RSD Electric Operation

Maximum Size - 6000mm wide x 5000 mm high Operation - Continuous round chain Curtain - 22swg or 20swg (over 25 square metres) 3” curved traditional galvanised lath. 1.6mm thick galvanised ‘T’ section bottom rail Barrel - Standard 5” diameter tube, counterbalanced (single or double) sprung barrel, 25” mm shaft, Nylon bearing blocks, complete with sealed for life bearings. Driven via straight cut gears, normally 4:1 ratio. Single reduction gearing as standard, double reduction is automatically added over 18 square metres. Flags - End plates 6mm thick, Angles 75mm x 50mm x 6mm, 2 ½” Heavy Duty galvanised guide Locking - Via Sine Plated Chain Keep System (Padlock by others) Optional Extras Hood - Weatherproof Hood made from 20swg galvanised material. This covers barrel mechanism and curtain from the elements when fixed externally Fascia - Made from 20swg galvanised material. Normally provided when shutters are fixing between the structural openings. Bottom Seal - Rubber ‘D’ section type seal to help prevent vermin and water ingress Wicket Door - Personnel type ‘Wicket / Pass’ door is normally added when the main shutter is the only entry / exit point for the building. Powder Coated Finish - A Polyester powder coated finish can be added to the shutter to enhance the appearance. A large range of colours are available from the RAL or BS range. Plastisol - A Plastisol coated finish can be applied to a shutter curtain only. Normally used on internal normal coil fix (giving a colour appearance from the outside). The colour range is smaller than powder coating and is normally used in conjunction with the cladding finish of a building. It is also more competitive that powder coating.

Maximum Size - 7000mm wide x 7000 mm high Operation - Single phase (240v) or 3 phase (415v) motor via push buttons. Curtain - Double skin – traditional galvanised lath. Complete with a rubber bottom weather seal. This helps prevent vermin and water ingress. Barrel - Standard diameter tube, counterbalanced (single or double) sprung barrel, 25mm shaft, steel bearing blocks, complete with sealed for life bearings. Driven via straight cut gears, normally 4:1 ratio. Single reduction gearing as standard. Flags - End plates 6mm thick, Angles 100mm x 75mm x 8mm, 85mm Heavy Duty galvanised guide. Double brush sealing system. Motor - Single phase or 3 phase – Flange mounted to end plate. Complete with emergency over-ride chain facility. “U” value - 0.733 W/m2K Optional Extras Hood and motor covers - Weatherproof hood made from 20swg galvanised material. This covers barrel mechanism and curtain from the elements when fixed externally. Hood - Weatherproof Hood made from 20swg galvanised material. This covers barrel mechanism and curtain from the elements when fixed externally Fascia - Weatherproof hood made from 20swg material. This covers barrel mechanism and curtain from the elements when fixed externally. Normally provided when shutters are fixing between the structural openings Wicket Door - Personnel type ‘wicket / pass’ door is normally added when the main shutter is the only entry / exit point for the building. Colour coated finish - A polyester powder coated finish / Plastisol can be added to the shutter to enhance the appearance. A large range of colours from the RAL or BS range.

Maximum Size - 10000mm wide x 8000 mm high, (Larger Sizes upon Application) Operation - Single phase (240v) or 3 phase (415v) motor via push buttons. Curtain 22swg, 20swg (over 25 square metres) 18swg (over 49 square metres) 3” curved traditional galvanised lath, 1.6mm thick galvanised T section bottom rail. Barrel Standard 5” diameter tube counterbalanced (single or double) sprung barrel, 25”mm shaft, Nylon bearing blocks, complete with sealed for life bearings. Driven via straight cut gears, normally 4:1 ratio. Single reduction gearing as standard. Flags - Endplates 6mm thick, Angles 75mm x 50mm x 6mm, 2 ½” heavy duty galvanised guide. Motor - Single Phase (240v) or 3 Phase (415v) – ¾ or 1 Horsepower motor, flange mounted to endplate. Complete with emergency over-ride facility. Optional Extras Hood - Weatherproof Hood made from 20swg galvanised material. This covers barrel mechanism and curtain from the elements when fixed externally. Fascia - Weatherproof Hood made from 20swg galvanised material. This covers barrel mechanism and curtain from the elements when fixed externally. Normally provided when shutters are fixing between the structural openings. Bottom Seal - Rubber “D” section type seal to help prevent vermin and water ingress. Wicket Door - Personnel type “Wicket / Pass” door is normally added when the main shutter is the only entry / exit point for the building. Powder Coated Finish - A polyester powder coated finish can be added to the shutter to enhance the appearance. A large range of colours are available from the RAL or BS range.